< home
Seaglass, 15 Coney Six,
East Wittering, West Sussex,
PO20 8DL

T 08452 603090
E sales@nexnix.co.uk
datapath x4

datapath dl8

The Datapath dL8 is an eight output distribution amplifier for ultra-high resolution Dual-Link DVI signals providing a programmable, flexible and low cost solution for any video wall display. When used in conjunction with up to 8 Datapath x4 stand alone wall controllers, the Datapath dL8 supports up to 32 screens display walls.

One Dual-Link DVI output, supporting graphics sources with pixel clocks up to 330MHz and resolutions beyond Quad-HD (3480 x 2160), can be delivered to eight outputs on separate DVI-D (Dual-Link) connectors. This Distribution Amplifier supports up to 20m even at full Dual Link resolutions due to additional active equalisation and re-clocking hardware, allowing convenient location for flexible display designs.

Flexibility and Creativity

The Datapath dL8 has been design and developed to operate with the x4 stand alone wall controller. This is a perfect partnership of a dL8 and up to eight Datapath x4 stand alone display wall controllers, allows the user to utilise their creative imagination to construct display solutions for digital signage applications and video walls. Each of the x4 units can accept one of Dual-Link DVI output from the dL8 and select four arbitrary regions from it for display all standard DVI (Single link)/ HDMI monitors.

Using this solution it is possible to create up to 32 screen video walls, with complex display wall arrangements for any mixture of landscape and portrait display formats. Since the dL8 guarantees that all eight outputs are exactly locked to the source, all these 32 screens can be frame-locked for optimum display of creative, dynamic content.

Resolution

This solution offers easy installation, low maintenance and high resolution visualisations. At high resolution, DVI signals cannot normally be guaranteed beyond 5m cables due to the nature of signal losses inherent in the DVI cables and connectors. Datapath dL8 has a fully programmable EDID to graphics source, allowing simple control of resolution and frame rate. Through active equalisation and re-clocking hardware it supports source cable lengths up to 20m at full Dual-Link resolutions.

The high quality re-clocking signal processing ensures that any timing skews that might be introduced by the lower cost input cables can be corrected within the dL8, maximising the signal quality of the output signals.

Application

Creative 32 screen display wall using a Datapath dL8 in conjunction with eight Datapath x4 units.

datapath dl8


Frame rate conversion (supporting genlocking to the input), arbitrary region and up scaling of the selected sections to the output monitor requirements is provided as part of the functionality of the Datapath x4 stand alone wall controllers.

Supporting up to 32 screen display walls when used in conjunction with up to 8 Datapath x4 stand alone display wall controllers

Distribution and signal conditioning of arbitrary DVI source signals

Any resolution or frame rate that can be supported in either Single or Dual-Link can be accepted.

Technical Specifications

Dimensions 438mm x 40mm x 172mm - 19" rack mount (1U)
Input Connectors
DVI-D (Dual-Link)
USB (Type B) for host communications
IEC mains power inlet
Output Connectors 8 x DVI-D (Dual-Link)
Front Panel Controls
Push button for EDID sampling
Three LED indicator lamps (Power/ Input/ Status) and flashing feedback for USB communications or EDID button press
USB Connection
Supports USB 2.0 for programming of input EDID parameters using the Datapath dL8 control application
Operating system support: Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7
Capabilities
Input Capabilities
Incorporates TMDS re-clocking equaliser to support up to 20m cables
Programmable EDID to indicate preferred mode
No limit to aspect ratios or frame rates of DVI signals that can be accepted, provided they remain within the Dual-Link 330MHz specification
Input is not HDCP compatible
Output Capabilities Supports up to 5m cables into standard DVI receiver¹
Other
Power Requirements Universal power supply (100-240V) 25W maximum
Temperature
Operating temperature: 0 to 35 °C (32 to 96 °F), internal fan cooling
Storage temperature: -20 to 70 °C (-4 to 158 °F)
Relative Humidity 5% to 90% non-condensing
Warranty 3 years

¹ Output cable lengths can be extended when driving receivers with built in equalisation - up to 20m for Datapath x4

 

Dimensions:

 

Price: £1295 ex vat

datapath x4 pdf Click here for a PDF spec sheet

For more information please contact us here

 

Please see our gallery for a selected few of our recent Audio Visual installations!!!
best tracker